There are some customers reflected that he has received the Honpo embroidery machine, and when try to use it, the thread keeps breaking while embroidering. Customer asked our sales team and want to know how to solve this issue?
To solve this issue, we should clear the reason first. For the computer embroidery machine, threads breaking normally reasons as below:
1. Did not oil the embroidery machine before using, it would need to oil the machine for once before using
2. The thread too tight, the thread does not work smoothly before embroidering; It needs to check if the thread tight or not, and need to check the thread smoothly before embroidering
3. Did not install the bobbin and rotating hook in right condition, check the thread install right in the bobbin and reinstall the rotating hook again.
4. The fabric too thin, did not add the back paper; Thin fabric will easy cause the fabric tight, and cause the thread breaking, so it would be better to add a layer of back paper.
5. The needle and the rotating hook distance issue. This would need to check under the professional engineer guiding.
Hope this article can help you find out the reasons and correct it. If the thread still breaking after correcting this operation, welcome to contact Honpo sales team, we will try our best to help you solve the issues.