Honpo Embroidery Machine is a powerful and versatile machine designed for embroidery enthusiasts, small business owners, and professionals in the fashion industry. With its advanced features and user-friendly interface, it makes embroidering intricate designs a breeze. In this guide, we’ll walk you through the whole process of operating Honpo Embroidery machine system step-by-step.
1. Power on the Machine
Before you start, make sure that the machine is properly connected to the power supply and that all the cables are tightly secured. Press the power button to turn on the machine, wait for a few seconds, and the control panel will light up.
2. Selecting an Embroidery Design Pattern
Next, you will need to select a design that you want to embroider. You can either choose from the built-in designs or copy your own custom design via USB flash drive. To select the design, press the “Design” button on the touch panel, and browse through the available designs using the arrow keys. Once you have selected a design, press the “OK” button to load it onto the machine.
3. Selecting a Right Frame to Match the Frame You Use
Honpo embroidery machine normally put the frame sizes from smaller to bigger one. you can select frame size A.B.C.D.E.F.G etc frame sizes to match the frame you use for the embroidery. This step is very important, if not select the right frame, it will easy to cause the machine damage. Eg: Selecting frame E(270x270), then the frame you use should be the square garment frame.
4. Preparing the Fabric & Install the Frame to Embroidery Machine
To prepare the fabric for embroidery, mount the fabric onto the embroidery hoop by loosening the screw and removing the inner hoop. Place the fabric over the inner hoop and re-attach the outer hoop while keeping the fabric taut. Make sure to center the fabric properly and tighten the screw to secure the hoops.
5. Thread the Machine & Thread Checking
To thread the machine with the threads color you want, first, place the spool on the holder and follow the threading path as indicated on the machine and thread the needle by pushing the thread through the needle eye from front to back. Make sure the thread is secured under the needle foot. And make sure the threads are runing smoothly via tearing the threads one by one. If it is tight, can lightly rotate the above button on the thread extension base or the buttons on the thread holder to adjust.
6. Check the Bobbin with Base Thread or Not
Before embroidery, need to be ensure that the machine has bobbin with threads on, and placed by a right way of installation.
7. Setting the Pattern Color & Direction & Position
Before you start embroidering, it is important to set the pattern colors, the direction of pattern, and the position, it is very simple to set these. Honpo Embroidery Machine allows you do the settings under "Edit" status, If machine under "Emb" status, will not allow you to do any settings.
8. Laser Positioning to Ensure the Pattern Position Right
Once you have set the stitch parameters, you can press the “Set Start” button on the touch panel, and the machine will start auto laser positioning, you will be able to see the red light on the frame and run for the embroidery outer edge to ensure the pattern position right within the frame area, and will not crash the frame with machine.
9. Start Embroider the Pattern
Once finished the operation of "Set Start" and ensure the position right, just press "Start" to start the embroidery. During this process, monitor the machine for any thread breakage or other issues and stop the machine if necessary. Be sure to keep the fabric taut and smooth throughout the process.
10. Finishing the Embroidery
Once the embroidery is complete, remove the fabric from the hoop by loosening the screw and gently pulling the fabric. Trim any stray threads or jump stitches using a sharp pair of scissors. Finally, give the embroidery a good press with a hot iron to make it flat and neat.
Conclusion
Honpo Embroidery Machine is a powerful and versatile embroidery machine that can produce intricate designs with ease. By following this guide, you can master the process of operating the machine and create stunning embroideries that will impress your clients, customers, or friends. So, what are you waiting for? Start embroidering with Honpo Embroidery Machine today!